Solved past paper · Part I (MCQs)

CSS General Science and Ability 2025

20 questions with four options each. The correct answer is marked in green.

  1. 1. 'Blue dwarfs' and 'Red giants' respectively refer to?

    1. AYoung star and Old star
    2. BReal star and Fake star
    3. CCold Star and Hot Star
    4. DNone of these

    Explanation: Blue dwarf stars are in early life cycle stages, burning hydrogen in their cores. Red giants are older stars that have exhausted core hydrogen and expanded - cooler, redder, and more luminous.

    Key facts: Stellar Classification
    • Blue dwarfs: Young stars in early life cycle; hotter, bluer, more luminous; smaller.
    • Red giants: Old stars; exhausted core hydrogen; expanded and cooled to red/orange colour.
    • Main sequence: Phase where stars fuse hydrogen to helium - longest phase of stellar life.
    • Sun's future: Sun will become a red giant in ~5 billion years, expanding to engulf Earth.
    • Star colour: Colour indicates temperature: blue/white (hottest) → yellow → orange → red (coolest).
  2. 2. Most major Tsunamis are produced by earthquakes with hypocenters less than?

    1. A10 km
    2. B20 km
    3. C30 km
    4. D40 km

    Explanation: Most major tsunamis are generated by shallow-focus earthquakes with hypocenters less than 40 km deep. These shallow quakes cause maximum seafloor displacement, generating powerful tsunamis.

    Key facts: Tsunamis
    • Shallow focus: Hypocenters <40 km deep generate the most powerful tsunamis.
    • Cause: Sudden seafloor displacement by underwater earthquakes, landslides, or volcanoes.
    • Speed: Travel at ~700–800 km/h in deep ocean (jet-plane speed); slow near shore.
    • Pacific Ocean: Over 80% of the world's tsunamis occur in the Pacific Ocean region.
    • 2004 Indian Ocean: Most deadly modern tsunami; >227,000 deaths; M9.1 earthquake off Sumatra.
  3. 3. Which source of energy is caused by uneven heating of Earth's surface?

    1. AGeothermal
    2. BSolar
    3. CWind
    4. DNone of these

    Explanation: Wind is caused by the uneven heating of Earth's surface by the Sun - warmer regions heat air, which rises and creates pressure differences. Cooler air flows in to fill the low-pressure areas, creating wind.

    Key facts: Wind Energy
    • Cause: Uneven solar heating creates temperature and pressure differences → wind.
    • Renewable: Wind is a renewable, zero-emission energy source.
    • Wind turbines: Convert kinetic energy of wind to electricity; most efficient at 12–16 m/s wind.
    • Global capacity: ~2,100 GW installed wind capacity globally (2023).
    • Geothermal: Energy from Earth's internal heat - different source from wind.
  4. 4. Global winds towards the western direction are known as:

    1. AEastern winds
    2. BWesterlies
    3. CTrade winds
    4. DNone of these

    Explanation: Westerlies are prevailing winds blowing from the west toward the east in the middle latitudes (30°–60°) of both hemispheres. They are also called 'Shrieking Sixties', 'Furious Fifties', and 'Roaring Forties'.

    Key facts: Global Wind Patterns
    • Westerlies: Blow from west to east; found between 30°–60° latitude in both hemispheres.
    • Trade winds: Blow from subtropical highs toward equatorial low pressure; reliable and steady.
    • Polar easterlies: Cold, dry winds blowing from poles toward 60° latitude in both hemispheres.
    • Roaring Forties: Particularly strong westerlies at 40°–50° latitude in Southern Hemisphere.
    • Coriolis effect: Earth's rotation deflects winds - creating the pattern of global wind belts.
  5. 5. Perinatal transmission is said to occur when a pathogen is transmitted from?

    1. AWife to Husband
    2. BHusband to wife
    3. CMother to infant
    4. DNone of these

    Explanation: Perinatal transmission (mother-to-child transmission/MTCT) occurs when a pathogen is transmitted from a mother to her infant during pregnancy, childbirth, or breastfeeding - e.g., HIV, hepatitis B.

    Key facts: Perinatal Transmission
    • Definition: Mother-to-child transmission (MTCT) during pregnancy, childbirth, or breastfeeding.
    • HIV MTCT: HIV can be transmitted perinatally; antiretroviral therapy reduces risk to <2%.
    • Hepatitis B: High perinatal transmission risk; vaccination at birth prevents infection.
    • Routes: In utero (transplacental), intrapartum (during delivery), or postpartum (breastmilk).
    • Prevention: Antiretroviral treatment, C-section delivery, and avoiding breastfeeding reduces MTCT.
  6. 6. Which plant group needs both land and water to complete its life cycle?

    1. AReyophyta
    2. BBryophyta
    3. CEngeophyta
    4. DNone of these

    Explanation: Bryophytes (mosses, liverworts, hornworts) require both land and water to complete their life cycle - they grow on land but need water for fertilization (their sperm swim to the egg through water).

    Key facts: Bryophyta
    • Examples: Mosses, liverworts, and hornworts - simplest land plants.
    • Water dependency: Sperm must swim through water to reach eggs - require moisture for reproduction.
    • No vascular tissue: Lack xylem and phloem - transport water by diffusion; hence small size.
    • Habitat: Moist, shaded environments - forests, stream banks, rocky surfaces.
    • Ecological role: Important in water retention and carbon storage in ecosystems (peat moss).
  7. 7. Maximum amount of carbohydrates are obtained from?

    1. AWhole grain food
    2. BOily food
    3. CVegetable food
    4. DNone of these

    Explanation: Whole grain foods (rice, wheat, oats, corn, potatoes, dried beans) are the richest sources of carbohydrates - providing both simple and complex carbohydrates including dietary fibre.

    Key facts: Carbohydrates
    • Whole grains: Rice, wheat, oats, corn - richest carbohydrate sources; also high in fibre.
    • Complex carbs: Starch and fibre in whole grains; digest slowly; provide sustained energy.
    • Simple carbs: Sugars in fruits and milk; digest rapidly; quick energy source.
    • Function: Primary energy source for the body; brain runs almost exclusively on glucose.
    • Recommended: 45–65% of total daily calories should come from carbohydrates (WHO).
  8. 8. Which class has the largest number of animal species?

    1. ABirds
    2. BInsects
    3. CFish
    4. DNone of these

    Explanation: Insects (class Insecta) belong to phylum Arthropoda - the largest animal phylum. With over 1 million described species (and millions more estimated), insects are by far the most species-rich animal class.

    Key facts: Insects - Most Diverse Animal Class
    • Species count: >1 million described insect species; estimated 5–10 million total species.
    • Phylum: Class Insecta belongs to Phylum Arthropoda - the largest animal phylum.
    • Features: 3 body parts (head, thorax, abdomen); 6 legs; most have wings at some stage.
    • Ecological role: Pollination, decomposition, pest control, and food source for other animals.
    • Beetles: Order Coleoptera (beetles) - largest insect order; ~400,000 described species.
  9. 9. The process of preserving meat by stewing in a covered earthenware jug is called:

    1. AFreezing
    2. BBug
    3. CJugging
    4. DNone of these

    Explanation: Jugging is a traditional food preservation method of slow-cooking meat (often game or fish) in a covered earthenware jug with brine or gravy. Red wine and/or the animal's blood are sometimes added.

    Key facts: Food Preservation Methods
    • Jugging: Slow-cooking meat in sealed earthenware jug with brine/gravy; traditional method.
    • Freezing: Stops microbial activity by reducing temperature below freezing point.
    • Pickling: Preserving in brine (salt water) or acid (vinegar); creates hostile environment for bacteria.
    • Smoking: Exposes food to smoke; dries surface and adds antimicrobial compounds.
    • Pasteurization: Heat treatment (72°C/15 sec) kills harmful bacteria; used for milk and juice.
  10. 10. All operating systems get their total memory initialized from?

    1. ABIOS
    2. BWindows
    3. CRIOS
    4. DNone of these

    Explanation: BIOS (Basic Input/Output System) is firmware that initialises and tests hardware during computer startup, then loads the operating system. It acts as the bridge between hardware and software at boot.

    Key facts: BIOS
    • BIOS: Basic Input/Output System - firmware stored on motherboard chip.
    • Function: Initialises hardware (POST test), then loads the OS bootloader from storage.
    • POST: Power-On Self Test - BIOS checks CPU, RAM, and hardware at startup.
    • UEFI: Modern replacement for BIOS; supports larger drives and faster boot times.
    • CMOS: Small battery-powered chip that stores BIOS settings and the system clock.
  11. 11. Amount of data transmitted for a given amount of time is called?

    1. AROM
    2. BBandwidth
    3. CSpeed
    4. DNone of these

    Explanation: Bandwidth is the maximum rate at which data can be transferred over a network or internet connection in a given time - measured in bits per second (bps), kilobits/s (Kbps), megabits/s (Mbps), or gigabits/s (Gbps).

    Key facts: Bandwidth
    • Bandwidth: Maximum data transfer rate over a connection in a given time period.
    • Units: Measured in bps, Kbps, Mbps, or Gbps (gigabits per second).
    • Latency: Time delay for data to travel from source to destination - different from bandwidth.
    • Throughput: Actual data transfer rate achieved (often less than maximum bandwidth).
    • ROM: Read-Only Memory - permanent storage chip; unrelated to data transmission rate.
  12. 12. Which products can be prepared using raw guava?

    1. AJam
    2. BJelly
    3. CBoth Jam and Jelly
    4. DNone of these

    Explanation: Raw guava can be used to prepare both jams and jellies due to its high pectin content. Guava is also used for fruit pastes, sauces, and even wine. Pectin content is essential for gel formation in jams and jellies.

    Key facts: Guava Uses
    • Pectin: Guava is high in pectin - natural gelling agent essential for jams and jellies.
    • Jam: Made from crushed whole fruit + sugar; contains fruit pieces and pulp.
    • Jelly: Made from strained fruit juice only; clear, smooth, and firm texture.
    • Nutritional value: Rich in Vitamin C (4× more than oranges), lycopene, and dietary fibre.
    • Guava paste: Thick guava concentrate; popular in Latin American and Caribbean cuisine.
  13. 13. Which is used as a stabilizer in ice cream?

    1. AGluten
    2. BJelly
    3. CGelatin
    4. DNone of these

    Explanation: Gelatin is commonly used as a stabilizer in ice cream to improve texture, prevent ice crystal formation, and enhance overall stability. Other stabilizers include guar gum, xanthan gum, and carrageenan.

    Key facts: Ice Cream Stabilizers
    • Gelatin: Protein derived from animal collagen; prevents ice crystal formation in ice cream.
    • Guar gum: Plant-based stabilizer; improves texture and slows melting.
    • Carrageenan: Extracted from red seaweed; commonly used in ice cream and dairy products.
    • Function: Stabilizers bind water, improve texture, and extend shelf life of frozen desserts.
    • Emulsifiers: Also added to ice cream (e.g., lecithin) to blend water and fat uniformly.
  14. 14. In optical fiber, light is guided through the core due to:

    1. AReflection
    2. BReflection
    3. CTotal Internal Reflection
    4. DNone of these

    Explanation: In optical fiber, light is guided through the core by total internal reflection - light bounces off the core-cladding boundary at angles greater than the critical angle, preventing it from escaping the fiber.

    Key facts: Optical Fiber
    • Total internal reflection: Light reflects at core-cladding boundary; confined within the core.
    • Critical angle: Angle above which total internal reflection occurs; depends on refractive indices.
    • Core & cladding: Core (high refractive index) surrounded by cladding (lower index) - traps light.
    • Applications: Telecommunications, internet cables, medical endoscopes, sensors.
    • Speed: Light in fiber travels at ~200,000 km/s (slower than in vacuum due to glass medium).
  15. 15. Who is known as the inventor of Artificial Intelligence?

    1. ACharles Babbage
    2. BStephen Awaking
    3. CJohn McCarthy
    4. DNone of these

    Explanation: John McCarthy coined the term 'Artificial Intelligence' in 1956 at the Dartmouth Conference - widely regarded as the birth of AI as a formal academic discipline. He is known as the 'Father of AI'.

    Key facts: John McCarthy - Father of AI
    • Dartmouth 1956: AI coined by John McCarthy at Dartmouth Summer Research Project on Artificial Intelligence.
    • LISP: McCarthy invented LISP programming language (1958) - widely used in AI research.
    • Born/Died: September 4, 1927 – October 24, 2011 in United States.
    • Charles Babbage: 19th century mathematician; invented mechanical computers (not AI).
    • Alan Turing: Proposed Turing Test (1950) as a measure of machine intelligence.
  16. 16. Which is the common programming language for Artificial Intelligence?

    1. APython
    2. BJava
    3. CLisp
    4. DAll of these

    Explanation: Python, Java, and Lisp are all used for AI development. Python is currently the most popular due to its extensive libraries (TensorFlow, PyTorch). Lisp was historically dominant; Java is used in enterprise AI systems.

    Key facts: AI Programming Languages
    • Python: Most popular AI language today; libraries include TensorFlow, PyTorch, scikit-learn.
    • Java: Used in enterprise AI; Android development; strong for large-scale AI systems.
    • Lisp: First AI language; invented by John McCarthy (1958); still used in AI research.
    • R: Statistical computing language popular in data science and machine learning.
    • Julia: Emerging language for high-performance scientific computing and AI.
  17. 17. Cement factory laborers are prone to?

    1. AMycosis
    2. BCytosis
    3. CCytosilicosis
    4. DNone of these

    Explanation: Silicosis (cytosilicosis) is an occupational lung disease caused by inhalation of crystalline silica dust - common in cement, mining, and quarrying workers. It causes nodular lung scarring and inflammation.

    Key facts: Silicosis - Occupational Lung Disease
    • Silicosis: Lung disease from inhaling crystalline silica dust; causes nodular fibrosis.
    • Silica: SiO₂ - found in cement, sand, granite, and many construction materials.
    • Symptoms: Progressive shortness of breath, cough, and lung scarring; no cure.
    • Risk occupations: Cement workers, miners, quarry workers, sandblasters, glass manufacturers.
    • Prevention: Wet drilling, proper ventilation, and respirator use reduce silica dust exposure.
  18. 18. The fastest enzyme is

    1. ACarbonic anhydrase
    2. BCarboniclase
    3. CAscorbic Acid
    4. DNone of these

    Explanation: Carbonic anhydrase is the fastest known enzyme - it catalyses the interconversion of CO₂ and water to bicarbonate and protons at up to 10⁶ reactions per second. It is crucial for CO₂ transport and pH regulation.

    Key facts: Carbonic Anhydrase
    • Speed: Catalyses up to 10⁶ reactions per second - fastest known enzyme.
    • Reaction: CO₂ + H₂O ⇌ HCO₃⁻ + H⁺ - critical for CO₂ transport in blood.
    • Location: Found in red blood cells, gastric mucosa, pancreatic cells, kidney tubules.
    • pH regulation: Helps maintain blood pH by regulating bicarbonate levels.
    • Clinical use: Carbonic anhydrase inhibitors (e.g., acetazolamide) treat glaucoma and altitude sickness.
  19. 19. Process of adding vitamins to milk is known as:

    1. AFortification
    2. BStabilizer
    3. CPasturization
    4. DNone of these

    Explanation: Fortification is the process of adding vitamins or minerals to food to enhance its nutritional value. Milk is commonly fortified with Vitamins A and D to improve nutritional content and address common deficiencies.

    Key facts: Food Fortification
    • Fortification: Adding nutrients to food beyond its natural content to improve nutritional value.
    • Milk fortification: Vitamins A and D most commonly added to milk.
    • Pasteurization: Heat treatment to kill bacteria - different from fortification.
    • Examples: Iodized salt, iron-fortified flour, Vitamin D–fortified milk, folic acid in cereals.
    • WHO support: Fortification is a cost-effective strategy to combat micronutrient deficiency globally.
  20. 20. Waves used for Line-of-Sight (LOS) Communication are called?

    1. AUltra waves
    2. BSpace waves
    3. CRadio waves
    4. DNone of these

    Explanation: Space waves (sometimes called direct waves) are electromagnetic waves used for LOS communication - they travel in a straight line from transmitting antenna to receiving antenna and are used for TV, radar, and microwave links.

    Key facts: LOS Communication
    • Space waves: EM waves travelling directly in straight line between transmitter and receiver.
    • LOS requirement: Transmitting and receiving antennas must be in each other's line of sight.
    • Frequency: UHF and SHF frequencies (300 MHz–30 GHz) used for LOS links.
    • Applications: Television broadcasting, microwave links, radar, satellite uplinks.
    • Sky waves: Radio waves reflected off ionosphere - used for long-distance shortwave communication.

Ready to test yourself? Attempt the same paper as a timed test, with answers hidden until you choose.

Attempt this paper

Attempt this paper as a test

Score 0 / 20
00:00
Question 1 of 20 · CSS 2025Not answered

'Blue dwarfs' and 'Red giants' respectively refer to?

Explanation

Blue dwarf stars are in early life cycle stages, burning hydrogen in their cores. Red giants are older stars that have exhausted core hydrogen and expanded - cooler, redder, and more luminous.

Key facts: Stellar Classification
  • Blue dwarfs: Young stars in early life cycle; hotter, bluer, more luminous; smaller.
  • Red giants: Old stars; exhausted core hydrogen; expanded and cooled to red/orange colour.
  • Main sequence: Phase where stars fuse hydrogen to helium - longest phase of stellar life.
  • Sun's future: Sun will become a red giant in ~5 billion years, expanding to engulf Earth.
  • Star colour: Colour indicates temperature: blue/white (hottest) → yellow → orange → red (coolest).
Question 2 of 20 · CSS 2025Not answered

Most major Tsunamis are produced by earthquakes with hypocenters less than?

Explanation

Most major tsunamis are generated by shallow-focus earthquakes with hypocenters less than 40 km deep. These shallow quakes cause maximum seafloor displacement, generating powerful tsunamis.

Key facts: Tsunamis
  • Shallow focus: Hypocenters <40 km deep generate the most powerful tsunamis.
  • Cause: Sudden seafloor displacement by underwater earthquakes, landslides, or volcanoes.
  • Speed: Travel at ~700–800 km/h in deep ocean (jet-plane speed); slow near shore.
  • Pacific Ocean: Over 80% of the world's tsunamis occur in the Pacific Ocean region.
  • 2004 Indian Ocean: Most deadly modern tsunami; >227,000 deaths; M9.1 earthquake off Sumatra.
Question 3 of 20 · CSS 2025Not answered

Which source of energy is caused by uneven heating of Earth's surface?

Explanation

Wind is caused by the uneven heating of Earth's surface by the Sun - warmer regions heat air, which rises and creates pressure differences. Cooler air flows in to fill the low-pressure areas, creating wind.

Key facts: Wind Energy
  • Cause: Uneven solar heating creates temperature and pressure differences → wind.
  • Renewable: Wind is a renewable, zero-emission energy source.
  • Wind turbines: Convert kinetic energy of wind to electricity; most efficient at 12–16 m/s wind.
  • Global capacity: ~2,100 GW installed wind capacity globally (2023).
  • Geothermal: Energy from Earth's internal heat - different source from wind.
Question 4 of 20 · CSS 2025Not answered

Global winds towards the western direction are known as:

Explanation

Westerlies are prevailing winds blowing from the west toward the east in the middle latitudes (30°–60°) of both hemispheres. They are also called 'Shrieking Sixties', 'Furious Fifties', and 'Roaring Forties'.

Key facts: Global Wind Patterns
  • Westerlies: Blow from west to east; found between 30°–60° latitude in both hemispheres.
  • Trade winds: Blow from subtropical highs toward equatorial low pressure; reliable and steady.
  • Polar easterlies: Cold, dry winds blowing from poles toward 60° latitude in both hemispheres.
  • Roaring Forties: Particularly strong westerlies at 40°–50° latitude in Southern Hemisphere.
  • Coriolis effect: Earth's rotation deflects winds - creating the pattern of global wind belts.
Question 5 of 20 · CSS 2025Not answered

Perinatal transmission is said to occur when a pathogen is transmitted from?

Explanation

Perinatal transmission (mother-to-child transmission/MTCT) occurs when a pathogen is transmitted from a mother to her infant during pregnancy, childbirth, or breastfeeding - e.g., HIV, hepatitis B.

Key facts: Perinatal Transmission
  • Definition: Mother-to-child transmission (MTCT) during pregnancy, childbirth, or breastfeeding.
  • HIV MTCT: HIV can be transmitted perinatally; antiretroviral therapy reduces risk to <2%.
  • Hepatitis B: High perinatal transmission risk; vaccination at birth prevents infection.
  • Routes: In utero (transplacental), intrapartum (during delivery), or postpartum (breastmilk).
  • Prevention: Antiretroviral treatment, C-section delivery, and avoiding breastfeeding reduces MTCT.
Question 6 of 20 · CSS 2025Not answered

Which plant group needs both land and water to complete its life cycle?

Explanation

Bryophytes (mosses, liverworts, hornworts) require both land and water to complete their life cycle - they grow on land but need water for fertilization (their sperm swim to the egg through water).

Key facts: Bryophyta
  • Examples: Mosses, liverworts, and hornworts - simplest land plants.
  • Water dependency: Sperm must swim through water to reach eggs - require moisture for reproduction.
  • No vascular tissue: Lack xylem and phloem - transport water by diffusion; hence small size.
  • Habitat: Moist, shaded environments - forests, stream banks, rocky surfaces.
  • Ecological role: Important in water retention and carbon storage in ecosystems (peat moss).
Question 7 of 20 · CSS 2025Not answered

Maximum amount of carbohydrates are obtained from?

Explanation

Whole grain foods (rice, wheat, oats, corn, potatoes, dried beans) are the richest sources of carbohydrates - providing both simple and complex carbohydrates including dietary fibre.

Key facts: Carbohydrates
  • Whole grains: Rice, wheat, oats, corn - richest carbohydrate sources; also high in fibre.
  • Complex carbs: Starch and fibre in whole grains; digest slowly; provide sustained energy.
  • Simple carbs: Sugars in fruits and milk; digest rapidly; quick energy source.
  • Function: Primary energy source for the body; brain runs almost exclusively on glucose.
  • Recommended: 45–65% of total daily calories should come from carbohydrates (WHO).
Question 8 of 20 · CSS 2025Not answered

Which class has the largest number of animal species?

Explanation

Insects (class Insecta) belong to phylum Arthropoda - the largest animal phylum. With over 1 million described species (and millions more estimated), insects are by far the most species-rich animal class.

Key facts: Insects - Most Diverse Animal Class
  • Species count: >1 million described insect species; estimated 5–10 million total species.
  • Phylum: Class Insecta belongs to Phylum Arthropoda - the largest animal phylum.
  • Features: 3 body parts (head, thorax, abdomen); 6 legs; most have wings at some stage.
  • Ecological role: Pollination, decomposition, pest control, and food source for other animals.
  • Beetles: Order Coleoptera (beetles) - largest insect order; ~400,000 described species.
Question 9 of 20 · CSS 2025Not answered

The process of preserving meat by stewing in a covered earthenware jug is called:

Explanation

Jugging is a traditional food preservation method of slow-cooking meat (often game or fish) in a covered earthenware jug with brine or gravy. Red wine and/or the animal's blood are sometimes added.

Key facts: Food Preservation Methods
  • Jugging: Slow-cooking meat in sealed earthenware jug with brine/gravy; traditional method.
  • Freezing: Stops microbial activity by reducing temperature below freezing point.
  • Pickling: Preserving in brine (salt water) or acid (vinegar); creates hostile environment for bacteria.
  • Smoking: Exposes food to smoke; dries surface and adds antimicrobial compounds.
  • Pasteurization: Heat treatment (72°C/15 sec) kills harmful bacteria; used for milk and juice.
Question 10 of 20 · CSS 2025Not answered

All operating systems get their total memory initialized from?

Explanation

BIOS (Basic Input/Output System) is firmware that initialises and tests hardware during computer startup, then loads the operating system. It acts as the bridge between hardware and software at boot.

Key facts: BIOS
  • BIOS: Basic Input/Output System - firmware stored on motherboard chip.
  • Function: Initialises hardware (POST test), then loads the OS bootloader from storage.
  • POST: Power-On Self Test - BIOS checks CPU, RAM, and hardware at startup.
  • UEFI: Modern replacement for BIOS; supports larger drives and faster boot times.
  • CMOS: Small battery-powered chip that stores BIOS settings and the system clock.
Question 11 of 20 · CSS 2025Not answered

Amount of data transmitted for a given amount of time is called?

Explanation

Bandwidth is the maximum rate at which data can be transferred over a network or internet connection in a given time - measured in bits per second (bps), kilobits/s (Kbps), megabits/s (Mbps), or gigabits/s (Gbps).

Key facts: Bandwidth
  • Bandwidth: Maximum data transfer rate over a connection in a given time period.
  • Units: Measured in bps, Kbps, Mbps, or Gbps (gigabits per second).
  • Latency: Time delay for data to travel from source to destination - different from bandwidth.
  • Throughput: Actual data transfer rate achieved (often less than maximum bandwidth).
  • ROM: Read-Only Memory - permanent storage chip; unrelated to data transmission rate.
Question 12 of 20 · CSS 2025Not answered

Which products can be prepared using raw guava?

Explanation

Raw guava can be used to prepare both jams and jellies due to its high pectin content. Guava is also used for fruit pastes, sauces, and even wine. Pectin content is essential for gel formation in jams and jellies.

Key facts: Guava Uses
  • Pectin: Guava is high in pectin - natural gelling agent essential for jams and jellies.
  • Jam: Made from crushed whole fruit + sugar; contains fruit pieces and pulp.
  • Jelly: Made from strained fruit juice only; clear, smooth, and firm texture.
  • Nutritional value: Rich in Vitamin C (4× more than oranges), lycopene, and dietary fibre.
  • Guava paste: Thick guava concentrate; popular in Latin American and Caribbean cuisine.
Question 13 of 20 · CSS 2025Not answered

Which is used as a stabilizer in ice cream?

Explanation

Gelatin is commonly used as a stabilizer in ice cream to improve texture, prevent ice crystal formation, and enhance overall stability. Other stabilizers include guar gum, xanthan gum, and carrageenan.

Key facts: Ice Cream Stabilizers
  • Gelatin: Protein derived from animal collagen; prevents ice crystal formation in ice cream.
  • Guar gum: Plant-based stabilizer; improves texture and slows melting.
  • Carrageenan: Extracted from red seaweed; commonly used in ice cream and dairy products.
  • Function: Stabilizers bind water, improve texture, and extend shelf life of frozen desserts.
  • Emulsifiers: Also added to ice cream (e.g., lecithin) to blend water and fat uniformly.
Question 14 of 20 · CSS 2025Not answered

In optical fiber, light is guided through the core due to:

Explanation

In optical fiber, light is guided through the core by total internal reflection - light bounces off the core-cladding boundary at angles greater than the critical angle, preventing it from escaping the fiber.

Key facts: Optical Fiber
  • Total internal reflection: Light reflects at core-cladding boundary; confined within the core.
  • Critical angle: Angle above which total internal reflection occurs; depends on refractive indices.
  • Core & cladding: Core (high refractive index) surrounded by cladding (lower index) - traps light.
  • Applications: Telecommunications, internet cables, medical endoscopes, sensors.
  • Speed: Light in fiber travels at ~200,000 km/s (slower than in vacuum due to glass medium).
Question 15 of 20 · CSS 2025Not answered

Who is known as the inventor of Artificial Intelligence?

Explanation

John McCarthy coined the term 'Artificial Intelligence' in 1956 at the Dartmouth Conference - widely regarded as the birth of AI as a formal academic discipline. He is known as the 'Father of AI'.

Key facts: John McCarthy - Father of AI
  • Dartmouth 1956: AI coined by John McCarthy at Dartmouth Summer Research Project on Artificial Intelligence.
  • LISP: McCarthy invented LISP programming language (1958) - widely used in AI research.
  • Born/Died: September 4, 1927 – October 24, 2011 in United States.
  • Charles Babbage: 19th century mathematician; invented mechanical computers (not AI).
  • Alan Turing: Proposed Turing Test (1950) as a measure of machine intelligence.
Question 16 of 20 · CSS 2025Not answered

Which is the common programming language for Artificial Intelligence?

Explanation

Python, Java, and Lisp are all used for AI development. Python is currently the most popular due to its extensive libraries (TensorFlow, PyTorch). Lisp was historically dominant; Java is used in enterprise AI systems.

Key facts: AI Programming Languages
  • Python: Most popular AI language today; libraries include TensorFlow, PyTorch, scikit-learn.
  • Java: Used in enterprise AI; Android development; strong for large-scale AI systems.
  • Lisp: First AI language; invented by John McCarthy (1958); still used in AI research.
  • R: Statistical computing language popular in data science and machine learning.
  • Julia: Emerging language for high-performance scientific computing and AI.
Question 17 of 20 · CSS 2025Not answered

Cement factory laborers are prone to?

Explanation

Silicosis (cytosilicosis) is an occupational lung disease caused by inhalation of crystalline silica dust - common in cement, mining, and quarrying workers. It causes nodular lung scarring and inflammation.

Key facts: Silicosis - Occupational Lung Disease
  • Silicosis: Lung disease from inhaling crystalline silica dust; causes nodular fibrosis.
  • Silica: SiO₂ - found in cement, sand, granite, and many construction materials.
  • Symptoms: Progressive shortness of breath, cough, and lung scarring; no cure.
  • Risk occupations: Cement workers, miners, quarry workers, sandblasters, glass manufacturers.
  • Prevention: Wet drilling, proper ventilation, and respirator use reduce silica dust exposure.
Question 18 of 20 · CSS 2025Not answered

The fastest enzyme is

Explanation

Carbonic anhydrase is the fastest known enzyme - it catalyses the interconversion of CO₂ and water to bicarbonate and protons at up to 10⁶ reactions per second. It is crucial for CO₂ transport and pH regulation.

Key facts: Carbonic Anhydrase
  • Speed: Catalyses up to 10⁶ reactions per second - fastest known enzyme.
  • Reaction: CO₂ + H₂O ⇌ HCO₃⁻ + H⁺ - critical for CO₂ transport in blood.
  • Location: Found in red blood cells, gastric mucosa, pancreatic cells, kidney tubules.
  • pH regulation: Helps maintain blood pH by regulating bicarbonate levels.
  • Clinical use: Carbonic anhydrase inhibitors (e.g., acetazolamide) treat glaucoma and altitude sickness.
Question 19 of 20 · CSS 2025Not answered

Process of adding vitamins to milk is known as:

Explanation

Fortification is the process of adding vitamins or minerals to food to enhance its nutritional value. Milk is commonly fortified with Vitamins A and D to improve nutritional content and address common deficiencies.

Key facts: Food Fortification
  • Fortification: Adding nutrients to food beyond its natural content to improve nutritional value.
  • Milk fortification: Vitamins A and D most commonly added to milk.
  • Pasteurization: Heat treatment to kill bacteria - different from fortification.
  • Examples: Iodized salt, iron-fortified flour, Vitamin D–fortified milk, folic acid in cereals.
  • WHO support: Fortification is a cost-effective strategy to combat micronutrient deficiency globally.
Question 20 of 20 · CSS 2025Not answered

Waves used for Line-of-Sight (LOS) Communication are called?

Explanation

Space waves (sometimes called direct waves) are electromagnetic waves used for LOS communication - they travel in a straight line from transmitting antenna to receiving antenna and are used for TV, radar, and microwave links.

Key facts: LOS Communication
  • Space waves: EM waves travelling directly in straight line between transmitter and receiver.
  • LOS requirement: Transmitting and receiving antennas must be in each other's line of sight.
  • Frequency: UHF and SHF frequencies (300 MHz–30 GHz) used for LOS links.
  • Applications: Television broadcasting, microwave links, radar, satellite uplinks.
  • Sky waves: Radio waves reflected off ionosphere - used for long-distance shortwave communication.

Part II: written questions of 2025

The written part of the 2025 paper, as set by FPSC.

  1. (a) What effects are produced due to Rotation n of Earth? Explain briefly.
    (b) Describe Electromagnetic Radiations. Give its types and explain their applications
    (c) What are Hurricanes? How they are formed and what level of damage they can produce?
    (d) Explain the advantages and disad sof nitrogen containing fertilizers and insecticides.
  2. (a) Explain how temperature and light intensity affect the rate of photosynthesis in plants.
    (b) Describe the struct and functions of capillaries inthe human blood circulatory system.
    (c) What is hepati Give ypes and briefly explain its common symptoms along with preventions.
    (d) Differentiate between biom.and biomas Briefly explain various methods for obtaining energy from biomass.
  3. (a) What is deforestation State the disadvantages caused to the environment due to this.
    (b) Explain how water pollution is producca? pollution is producca? Describe the part played by bacteria after a river has been polluted by sewage.
    (c) State some examples of pollution caused by human activity and discuss the effects of each example.
    (d) What does air pollution mean? State ten serious effects of air pollution on the environment and briefly explain how they can be reduced.
  4. (a) Differentiate between food contaminants and food adulterants.
    (b) Enlist major food groups based on nutrients, their functions and sources.
    (c) What is Artificial Intelligence and how does it differ from traditional programming? Describe the main branches of Artificial Intelligence.
    (d) What are the advantages of optical fibers in the communication system? Draw the basic structure of optical fiber and explain propagation of light through it. (SECTION - B)
  5. (a) In an annual sale, Saima buys a Fridge and a Freezer. The sale offers 15% off everything and she pays a total of Rs.57,120/-. If the price of a freezer, before the sale, is Rs. 40,000/-, What was the price of the Fridge before the sale?
    (b) Mr. Rasheed pays a deposit of Rs. 60,000/- followed by 36 equal monthly payments. The total amount that he pays is 127% of the basic price of Rs. 3,360,000/-, Calculate Rasheed's monthly payment.
    (c) Divide Rs. 600/- among A, B, and C so that Rs. 40 more than 2/5 of A's share, Rs. 20 more than 2/7 of B's share, and Rs. 10 more than 9/17 of C's share may be equal.
    (d) Find out the correct words from the jumbled spellings given below. TEANAIRM VAGNACEXETRA VADIETLIONC PKUNYBARTC TAESRONSC 18%. On another day, if 10% discount is given on the marked price
  6. (a) Calculate the marked price of the sculpture if it is sold for Rs.79950-after a di unt of sculpture before it is sold at a further discount of 8%. Would the sale price still be Rs.79950/-?
    (b) Majid pays a total of Rs.51520/- for his car insurance. charge plus 15% sales tax. Calculate the amount of sales ta that Majid pays.
    (c) A camp site in the shape of a rectangle has sides (3x+6) mand (x+1) m and the diagonal is (4x+1) m. Find the area and the perimeter of the
    (d) Arrange the following fractions in the descending (a) 7/12, 4/7, 9/14, 25/42 (c) 6/35, 5/21, 2/7,4/15 (e) 1/5, 2/7, 3/8, 4/13,517 'y' centimeter and the total rface area of the cuboid is given to be 376cm². Find the height of the
  7. (a) A train in first five successive minutes from its start runs 68m, 127m, 208m, 312m and 535m and for next 5 minutes maintains an average speed of 33km/hr. Find the whole distance covered and the average speed in covering this total distance.
    (b) A solid cuboid with 10cm by 6cm is available. The height of the cuboid is
    (c) In a six mily (A, B, C, D, E and F). re two fathers, three brothers and a mother. If C is the sister of F, B is the brother of E's husband. D is the father of A and grandfather of F. Who is E's husband?
    (d) How many prime numbers are between each of the following pairs of numbers? a) V3 and 120 b) √10 and 410 c) 10 and V999 d) 28 and 120 e) V8 and 400

What the 2025 paper asked

The MCQ part of the CSS General Science and Ability 2025 paper (General Knowledge-I (General Science and Ability)) had 20 questions available here, each worth one mark. Most of them came from Earth, Space and Environment (4 questions) and Technology and Computers (4).

TopicQuestions in 2025In all papers
Earth, Space and Environment456
Technology and Computers416
Physics371
Human Body, Diseases and Health365
Everyday Science340
Biology: Plants and Animals231
Chemistry161

General Science and Ability is Paper I of General Knowledge in the CSS written exam. It carries 100 marks: 20 MCQs (20 marks, 30 minutes) and a written part with one section on General Science and one on General Ability. The papers are set by the Federal Public Service Commission (FPSC); see also the Central Superior Services overview. For more practice, see the CSS preparation page and take the CSS General Science and Ability mock exam.

Solve more CSS General Science and Ability past papers