The Montreal Protocol focuses on the reduction of:
Explanation
The Montreal Protocol (1987) is an international treaty aimed at phasing out ozone-depleting substances (ODS) such as chlorofluorocarbons (CFCs) and halons to protect the Earth's ozone layer.
Significance: One of the world's most successful environmental agreements
CSS Tip: Montreal Protocol → Ozone Layer → CFCs (1987).
Question 2 of 61 · CSS 2026Not answered
LEDs save energy because light is produced by:
Explanation
LEDs emit light when electrons recombine with holes in a semiconductor, releasing energy as photons. This process is highly efficient and produces very little heat.
Key facts
Full Form: Light Emitting Diode (LED)
Working Principle: Electroluminescence
Light Produced By: Electron-hole recombination
Advantage: High efficiency, low heat, long lifespan
CSS Tip: LED → Electron-hole recombination → Electroluminescence.
Question 3 of 61 · CSS 2026Not answered
The most responsible pollutant for photochemical smog is:
Explanation
Nitrogen oxides (NOₓ) react with volatile organic compounds (VOCs) in the presence of sunlight to produce photochemical smog, with ground-level ozone being a major secondary pollutant.
Sulfur dioxide (SO₂) and nitrogen oxides (NOₓ) react with water vapor in the atmosphere to form sulfuric acid (H₂SO₄) and nitric acid (HNO₃), which fall as acid rain.
Key facts
Main Gases: SO₂ and NOₓ Acids Formed: Sulfuric acid and nitric acid Sources: Coal-fired power plants, industries, motor vehicles Effects: Soil acidification, forest damage, corrosion of buildings
CSS Tip: Acid Rain → SO₂ + NOₓ.
Question 5 of 61 · CSS 2025Not answered
Cement factory laborers are prone to?
Explanation
Silicosis (cytosilicosis) is an occupational lung disease caused by inhalation of crystalline silica dust - common in cement, mining, and quarrying workers. It causes nodular lung scarring and inflammation.
Prevention: Wet drilling, proper ventilation, and respirator use reduce silica dust exposure.
Question 6 of 61 · CSS 2024Not answered
The pH of soil is raised using:
Explanation
Limestone (calcium carbonate, CaCO₃) is applied to acidic soil to raise its pH - a process called liming. It neutralizes soil acidity and improves availability of nutrients for plant growth.
Gypsum: Calcium sulphate - used to improve soil structure but does NOT raise pH.
Urea: Nitrogen fertilizer - actually slightly acidifies soil over time.
Question 7 of 61 · CSS 2024Not answered
Chemical formula for Alum is:
Explanation
Potash alum - the most common alum - has the formula KAl(SO₄)₂·12H₂O. It is a hydrated double sulphate salt of potassium and aluminium, widely used in water purification and food processing.
Uses: Water purification (flocculation), food additive (E522), pickling, deodorant.
Ammonium alum: NH₄Al(SO₄)₂·12H₂O - used as a food additive and baking powder.
Soda alum: NaAl(SO₄)₂·12H₂O - used in baking powder formulations.
Flocculation: Alum causes suspended particles to clump together and settle in water treatment.
Question 8 of 61 · CSS 2024Not answered
Isotopes of any element contain equal number of:
Explanation
Isotopes are atoms of the same element - they have the same number of protons (same atomic number) but different numbers of neutrons, giving them different mass numbers.
Key facts: Isotopes
Same protons: All isotopes of an element have identical proton count (atomic number).
Different neutrons: Mass number difference is solely due to different neutron counts.
Atomic number: Defines the element; proton number = atomic number.
Mass number: Total protons + neutrons = mass number (varies between isotopes).
Radioactive isotopes: Unstable isotopes emit radiation to reach a stable nuclear configuration.
Question 9 of 61 · CSS 2024Not answered
Which contains greater number of carbon atoms per mole?
Explanation
Ethanol (C₂H₅OH) contains 2 carbon atoms per molecule - so one mole of ethanol contains 2 moles of carbon atoms. Methanol has 1C; chloroform has 1C; water has 0C.
Key facts: Carbon Atoms per Molecule
Ethanol (C₂H₅OH): 2 carbon atoms per molecule - most carbon of the listed options.
Methanol (CH₃OH): 1 carbon atom per molecule.
Chloroform (CHCl₃): 1 carbon atom per molecule.
Water (H₂O): 0 carbon atoms - contains only hydrogen and oxygen.
Avogadro's number: 1 mole = 6.022 × 10²³ molecules - applies to all substances.
Question 10 of 61 · CSS 2023Not answered
In presence of H₂O₂ (Hydrogen Peroxide), more acidic is
Explanation
In the presence of H₂O₂, water (H₂O) is considered the reference - H₂O₂ (pKa ~11.6) is actually a weaker acid than acetic acid but both are weak acids; water's pH is neutral (7) by itself.
Key facts: Acids & H₂O₂
H₂O₂ pKa: ~11.6 - hydrogen peroxide is a very weak acid; both H₂O and H₂O₂ are weak acids.
H₂O₂ uses: Antiseptic, bleaching agent, industrial oxidizer; 3% solution common in first aid.
Question 11 of 61 · CSS 2023Not answered
Formula for total surface area of cone is:
Explanation
Total surface area of cone = πr² (circular base) + πrl (lateral/curved surface), where r = base radius and l = slant height. Simplified: πr(r + l).
Key facts: Cone Formulas
Total SA: πr² + πrl = πr(r + l); r = radius, l = slant height.
Lateral SA: πrl - curved surface area only (excluding the circular base).
Volume: (1/3)πr²h; h = perpendicular height of the cone.
Slant height: l = √(r² + h²) - the hypotenuse of the right triangle formed by r and h.
π (pi): Mathematical constant ≈ 3.14159; ratio of circumference to diameter of a circle.
Question 12 of 61 · CSS 2023 SpecialNot answered
During combustion of gasoline in a vehicle engine, energy used is
Explanation
Gasoline stores chemical energy in its molecular bonds. Combustion converts this to heat, then to mechanical energy (motion of pistons and wheels). The useful output energy from combustion is mechanical.
Repeated: also asked in CSS 2018.
Key facts: Energy Conversion in Engines
Chemical energy: Stored in fuel's molecular bonds; released by combustion.
Combustion: Chemical reaction releasing heat energy; ignites gasoline in cylinders.
Mechanical energy: Pistons convert heat to mechanical motion - turning the wheels.
Efficiency: Petrol engines convert only ~25–35% of fuel's chemical energy into motion.
Question 13 of 61 · CSS 2023 SpecialNot answered
Soil pollution is caused by
Explanation
Acid rain - formed when sulfur dioxide and nitrogen oxides react with water in the atmosphere - falls on soil, alters its pH, and leaches harmful chemicals into the ground, damaging soil health and plant life.
Key facts: Acid Rain & Soil Pollution
Formation: SO₂ + NOₓ react with water vapour in atmosphere forming H₂SO₄ and HNO₃.
Sources: Burning fossil fuels (coal, oil) in power plants and vehicles.
pH of acid rain: Normal rain pH ~5.6; acid rain pH < 5.0 (more acidic).
Aerosol: Suspension of tiny particles in air - contributes to air but not direct soil pollution.
Question 14 of 61 · CSS 2023Not answered
Mass of a neutron star compared to the mass of the sun?
Explanation
Neutron stars typically have a mass between 1.4 and 2.35 times that of the Sun. The heaviest confirmed neutron star on record is 2.35 solar masses - packed into a radius of only 8–16 km.
Key facts: Neutron Stars
Mass range: 1.4 to 2.35 solar masses - heaviest neutron star on record is 2.35 M☉.
Size: Radius only 8–16 km - despite mass greater than the Sun (radius 696,000 km).
Formation: Formed from remnants of massive stars (8–20 solar masses) after supernova.
Density: Density ~10¹⁴ g/cm³ - a teaspoon of neutron star matter weighs ~1 billion tonnes.
In covalent bonding, atoms share electrons to form a stable electron configuration - typically filling their outer shell (octet rule). The bond results from mutual electrostatic attraction of shared electrons.
Key facts: Covalent Bonding
Electron sharing: Atoms share electron pairs; both atoms 'count' shared electrons toward stability.
Single bond: One shared electron pair (e.g., H– H in H₂ gas).
Double bond: Two shared pairs (e.g., C=O in CO₂); shorter and stronger than single.
Triple bond: Three shared pairs (e.g., N≡N in N₂ gas); strongest covalent bond.
Ionic vs covalent: Ionic: electron transfer (metals + nonmetals); covalent: sharing (nonmetals only).
Question 16 of 61 · CSS 2023 SpecialNot answered
The chemical formula of methane gas is
Explanation
Methane (CH₄) consists of one carbon atom bonded to four hydrogen atoms by covalent bonds. It is the simplest alkane, the main component of natural gas, and also known as marsh gas.
Natural gas: Methane is the primary component (~95%) of natural gas used for cooking/heating.
Marsh gas: Also called marsh gas - produced by decomposition of organic matter in wetlands.
Greenhouse gas: Methane is 80× more potent than CO₂ as a greenhouse gas over 20 years.
Boiling point: -161.5°C - methane is a gas at room temperature; liquefied as LNG for transport.
Question 17 of 61 · CSS 2023Not answered
Which is an example of a conductor of electricity?
Explanation
Copper is an excellent conductor of electricity - its free electrons move easily through the metallic lattice. Rubber, glass, and wood are insulators that resist electric current flow.
Key facts: Conductors vs Insulators
Conductors: Allow free flow of electric current; e.g., copper, silver, gold, aluminium.
Copper: Most widely used conductor; second only to silver in conductivity; cheap and flexible.
Insulators: Resist current flow; e.g., rubber, glass, wood, plastic, air.
Semiconductors: Conduct under certain conditions; e.g., silicon, germanium - used in electronics.
Resistance: Measured in ohms (Ω); conductors have very low resistance; insulators very high.
Question 18 of 61 · CSS 2022Not answered
Combining of two non-metal atoms by sharing one or more pairs of electron is called:
Explanation
A covalent bond forms when two non-metal atoms share one or more electron pairs to achieve stable configurations - the bond arises from electrostatic attraction of the shared electrons.
Key facts: Covalent Bond
Covalent bond: Formed by sharing electron pairs; typically between two non-metal atoms.
Ionic bond: Formed by complete electron transfer between a metal and a non-metal.
Single bond: One shared pair (e.g., H–H); double bond: two pairs (e.g., C=C).
Polar covalent: Unequal sharing - one atom attracts electrons more strongly (e.g., H₂O).
Examples: H₂O, CO₂, CH₄, NH₃ - all common covalently bonded molecules.
Question 19 of 61 · CSS 2022Not answered
Scientific name of atoms of same element with different mass number?
Explanation
Isotopes are atoms of the same element with the same number of protons but different numbers of neutrons - giving them different mass numbers but nearly identical chemical properties.
Key facts: Isotopes
Definition: Same element (same protons), different mass numbers (different neutrons).
Hydrogen isotopes: Protium (0n), Deuterium (1n), Tritium (2n) - all have 1 proton.
Chemical behavior: Isotopes of the same element are nearly chemically identical.
Physical difference: Differ in mass - used in nuclear reactors and medical imaging.
Carbon-14: Radioactive isotope used in carbon dating to determine fossil age.
Question 20 of 61 · CSS 2022Not answered
Symbolic formula for Ozone Gas?
Explanation
Ozone is a naturally occurring triatomic oxygen molecule (O₃) - three oxygen atoms bonded together. It forms a protective layer in the stratosphere and is a pollutant at ground level.
Key facts: Ozone (O₃)
Formula: O₃ - three oxygen atoms bonded; triatomic allotrope of oxygen.
Stratospheric ozone: Found 15–35 km up; absorbs UV-B and UV-C - protects Earth's surface.
Tropospheric ozone: At ground level - a pollutant; causes smog and respiratory problems.
CFCs: Destroy ozone; banned globally by Montreal Protocol (1987).
O₂ vs O₃: O₂ = diatomic oxygen we breathe; O₃ = ozone; CO₂ = carbon dioxide.
Question 21 of 61 · CSS 2022Not answered
Which cannot be considered as renewable source of energy?
Explanation
Petroleum is a fossil fuel formed over ~300 million years - it is non-renewable and cannot be replenished at human timescales. Wind and solar are naturally and continuously replenished.
Key facts: Renewable vs Non-Renewable Energy
Petroleum: Fossil fuel; non-renewable; takes ~300 million years to form.
Solar power: Harnessed via photovoltaic cells; solar cost dropped 90% since 2010.
Wind energy: Generated by turbines; global installed capacity: ~2,100 GW (2023).
Fossil fuels: Coal, oil, natural gas supply ~80% of global energy; main CO₂ emissions source.
Question 22 of 61 · CSS 2021Not answered
Which layer of atmosphere contains ions and helps in wireless communication?
Explanation
The ionosphere (60–1000 km above Earth) contains ions and free electrons created by solar radiation, which reflect radio waves - enabling long-distance wireless communication.
Key facts: Ionosphere
Altitude: Extends 60–1000 km (37–600 miles) above Earth's surface.
Function: Reflects AM radio and shortwave signals back to Earth for long-distance communication.
Ion source: Solar radiation ionizes neutral atoms, knocking off electrons to form ions.
Thermosphere: The layer (80–500 km) that contains the ionosphere within it.
Biosphere: The zone of all life on Earth - not an atmospheric layer.
Question 23 of 61 · CSS 2021Not answered
A covalent bond is between two atoms when they:
Explanation
A covalent bond forms when two atoms share one or more electron pairs to achieve a stable electron configuration - typically a full outer shell (octet rule satisfied).
Key facts: Covalent vs Ionic Bond
Covalent bond: Formed by sharing electrons; typically between two non-metal atoms.
Ionic bond: Formed by complete electron transfer - one atom gains, one loses electrons.
Octet rule: Atoms share electrons to achieve 8 electrons in their outer shell.
Examples: H₂O, CO₂, CH₄, NH₃ - all held by covalent bonds.
Metallic bond: Electrons shared among a lattice of metal atoms - distinct type of bond.
Question 24 of 61 · CSS 2021Not answered
The Ozone layer is present in
Explanation
The ozone layer is found in the stratosphere at 15–35 km altitude, absorbing 97–99% of the Sun's harmful UV-B and UV-C radiation before it reaches Earth's surface.
Repeated: also asked in CSS 2011, 2016, 2018.
Key facts: Ozone Layer
Location: Stratosphere, 15–35 km above Earth's surface.
UV absorption: Ozone (O₃) absorbs UV-B and UV-C - protecting life on Earth.
Depletion: CFCs (chlorofluorocarbons) destroy ozone; banned by Montreal Protocol (1987).
Troposphere: Lowest layer (0–10 km); where weather occurs; we breathe this air.
Question 25 of 61 · CSS 2020Not answered
Impurities like boron, aluminum, gallium or indium are added to intrinsic semiconductor to form:
Explanation
Adding impurities like boron, aluminum, gallium, or indium to an intrinsic semiconductor creates a p-type semiconductor. An intrinsic semiconductor is a pure, undoped semiconductor material. P-type semiconductors are created by doping an intrinsic semiconductor with trivalent impurities (elements with three valence electrons).
N-type: Pentavalent dopants (phosphorus, arsenic) - extra electrons.
Junction diode: P-type + N-type joined together.
Uses: Transistors, solar cells, LEDs.
Question 26 of 61 · CSS 2020Not answered
The two planets between the Earth and the Sun are:
Explanation
The two planets located between the Earth and the Sun and moving outwards, are: Mercury, Venus. The planets in our solar system, starting closest to the sun and moving outwards, are: Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune.
Key facts: Mercury and Venus - Between Earth and Sun
Planets between Earth and Sun: Mercury and Venus.
Order from Sun: Mercury → Venus → Earth → Mars → Jupiter → Saturn → Uranus → Neptune.
Inner planets: Mercury, Venus, Earth, Mars - terrestrial.
Mercury: Closest to Sun; shortest year (88 days).
Venus: Hottest planet - thick CO2 atmosphere.
Question 27 of 61 · CSS 2020Not answered
Greenhouse gases absorb the:
Explanation
Greenhouse gases absorb infrared radiation (heat) emitted from the Earth's surface, trapping it in the atmosphere and contributing to the greenhouse effect, which keeps the planet warmer than it would otherwise be.
Key facts: Greenhouse Gases - Absorb Infrared
Absorb: Infrared radiation (heat).
Source: Heat emitted by Earth's surface.
Effect: Traps heat - raises global temperature.
GHGs: CO2, CH4, N2O, water vapour, CFCs.
Natural: Greenhouse effect is natural - humans are enhancing it.
Question 28 of 61 · CSS 2019Not answered
Permanent hardness of water is caused due to presence of dissolved:
Explanation
Permanent hardness of water is caused by the presence of dissolved chlorides and sulfates of calcium and magnesium. Permanent hardness is a type of water hardness that cannot be removed by simply boiling the water.
Key facts: Permanent Hardness - Sulphates and Chlorides
Permanent hardness: Sulphates and chlorides of calcium or magnesium.
Cannot remove by: Boiling - these salts don't decompose with heat.
Temporary hardness: Calcium bicarbonate - removed by boiling.
Removed by: Ion exchange, lime-soda process, water softeners.
Question 29 of 61 · CSS 2019Not answered
What is anthracite?
Explanation
Anthracite, also known as 'hard coal,' is a high-rank coal with the highest carbon content and lowest volatile matter among coal types, making it a clean-burning fuel with high energy density. Anthracite contains a high percentage of fixed carbon (86% or greater on a dry, ash-free basis).
Key facts: Anthracite - Carbon (Hard Coal)
Anthracite is: Carbon - highest-rank coal.
Carbon content: 86%+ fixed carbon.
Properties: Hard, lustrous, highest energy density of coals.
Bronze medals are typically made of a copper and tin alloy, with some medals also including zinc to make them harder and less prone to tarnishing. The primary metals used in bronze medals are copper and tin.
Key facts: Bronze Medal - Copper and Tin
Bronze medal: Copper and Tin.
Bronze: Alloy of copper (88%) + tin (12%) approximately.
Brass: Copper + Zinc.
Silver medal: Mostly silver.
Gold medal: Mostly silver - plated with 6g of gold.
Question 31 of 61 · CSS 2019Not answered
Atomic number is also called?
Explanation
The atomic number is also known as the proton number. It represents the number of protons in the nucleus of an atom, which is a defining characteristic of an element.
Key facts: Atomic Number - Proton Number
Also called: Proton number.
Defines: The element - same atomic number = same element.
Mass number: Protons + Neutrons - different from atomic number.
Question 32 of 61 · CSS 2019Not answered
H+ is yielded by:
Explanation
Acids yield H+ (hydrogen ions) when dissolved in water - this is the definition of an acid according to the Arrhenius and Bronsted-Lowry theories.
Which of the following is main nitrogenous waste in humans?
Explanation
The main nitrogenous waste in human beings is Urea and is termed as ureotelism and the animals which excrete urea are known as ureotelic animals. Urea is produced as a waste by the decomposition of unused proteins in the liver.
Key facts: Urea - Main Nitrogenous Waste
Main nitrogenous waste: Urea.
Produced in: Liver - from breakdown of amino acids.
Excreted by: Kidneys - via urine.
Ureotelism: Excreting urea as main N-waste - humans and most mammals.
Uricotelic: Birds/reptiles excrete uric acid - less water needed. Vit.E Vit.K Name of the Vitamin
Question 34 of 61 · CSS 2018Not answered
During combustion of petrol in car engine, energy is converted in:
Explanation
During petrol combustion in a car engine, chemical energy (from the fuel) is converted into thermal energy (heat), which then transforms into mechanical energy (movement of pistons and ultimately the wheels).
Repeated: also asked in CSS 2023 Special.
Key facts: Car Engine - Chemical to Mechanical
Energy conversion: Chemical → Thermal → Mechanical.
Petrol: Chemical energy stored in hydrocarbon bonds.
Combustion: C8H18 + O2 → CO2 + H2O + energy (heat).
Pistons: Heat converts to mechanical motion.
Efficiency: Petrol engines ~25% efficient - most energy lost as heat.
Question 35 of 61 · CSS 2018Not answered
Ionic bond between two atoms is:
Explanation
An ionic bond is a type of chemical bond formed by the electrostatic attraction between oppositely charged ions, resulting from the complete transfer of valence electrons from one atom to another, typically between a metal and a nonmetal.
Key facts: Ionic Bond - Complete Electron Transfer
Ionic bond: Complete transfer of valence electrons.
Example: NaCl - Na gives electron to Cl.
Covalent bond: Sharing of electrons - no complete transfer.
Results in: Ions (cation + anion) attracted by electrostatic force.
Typically: Between a metal and a non-metal.
Question 36 of 61 · CSS 2018Not answered
Layer of atmosphere in which Ozone layer lies is:
Explanation
The stratosphere is the layer of the Earth's atmosphere located above the troposphere, extending from roughly 10 to 50 kilometres (6 to 31 miles) above the Earth's surface. While ozone exists throughout the atmosphere, the stratosphere contains a higher concentration of ozone, forming the 'ozone layer'.
Repeated: also asked in CSS 2011, 2016, 2021.
Key facts: Ozone Layer - In Stratosphere
Ozone layer: Stratosphere.
Height: 10-50 km above Earth's surface.
Function: Absorbs harmful UV-B radiation.
Troposphere: Lowest layer - weather occurs here.
Mesosphere: 50-85 km - meteors burn up here.
Question 37 of 61 · CSS 2017Not answered
The process of converting oil into ghee is called:
Explanation
Hydrogenation is a chemical reaction between molecular hydrogen (H2) and another compound or element, usually in the presence of a catalyst such as nickel, palladium or platinum. The process is commonly employed to reduce or saturate organic compounds.
Key facts: Hydrogenation - Oil to Ghee
Oil to ghee: Hydrogenation.
Process: H2 added to unsaturated fats - makes them saturated.
Health concern: Partial hydrogenation creates trans fats - harmful.
Question 38 of 61 · CSS 2017Not answered
Sulphuric acid was first prepared by:
Explanation
In 8th-century alchemist and polymath Jabir ibn Hayyan, also known as Geber, is credited with the preparation of sulfuric acid, which he referred to as 'oil of vitriol'. Sulphuric acid was prepared by Johann Glauber in the 17th century by burning sulfur with saltpeter (potassium nitrate) in the presence of steam.
Key facts: Jabir bin Hayan - Sulphuric Acid
First prepared by: Jabir ibn Hayyan (Geber) - 8th century.
Called it: 'Oil of vitriol'.
Also known as: Geber - Arab alchemist and chemist.
Modern production: Contact process - catalytic oxidation of SO2.
Uses: Fertilisers, batteries, chemical industry - most produced chemical.
Question 39 of 61 · CSS 2017Not answered
Which metal is used as catalyst to convert oil into ghee?
Explanation
The metal catalyst used to convert oil into vegetable ghee (also known as vanaspati ghee) through the process of hydrogenation is nickel. Nickel acts as a catalyst, meaning it speeds up the reaction without being consumed itself.
Key facts: Nickel - Catalyst for Oil to Ghee
Catalyst: Nickel.
Process: Hydrogenation of vegetable oil.
Catalyst role: Speeds up reaction without being consumed.
Alternative: Palladium, platinum also used as catalysts.
The branch of physics which deals with atomic nuclei is:
Explanation
Nuclear physics specifically focuses on the structure, behavior, and interactions of atomic nuclei, including their constituents (protons and neutrons) and the forces that bind them together. It's distinct from atomic physics, which studies the atom as a whole, including its electrons and their interactions with the nucleus.
Key facts: Nuclear Physics - Deals with Atomic Nuclei
Studies atomic nuclei: Nuclear physics.
Atomic physics: Studies whole atom - including electrons.
Pakistan: PAEC (Pakistan Atomic Energy Commission) works in nuclear physics.
Question 41 of 61 · CSS 2016Not answered
The gas associated with global warming is:
Explanation
The primary gases associated with global warming, also known as greenhouse gases, are carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), and fluorinated gases.
Key facts: CO2 - Global Warming Gas
Primary gas: CO2 (carbon dioxide).
Other GHGs: CH4 (methane), N2O (nitrous oxide), fluorinated gases.
Effect: Traps heat in atmosphere - raises Earth's temperature.
Paris Agreement: International treaty to limit warming to 1.5-2°C above pre-industrial.
Question 42 of 61 · CSS 2016Not answered
The ozone layer is present in which atmospheric layer?
Explanation
The ozone layer, which is a region of high ozone concentration, is primarily found in the stratosphere, a layer of the Earth's atmosphere extending from about 10 to 50 kilometres (6 to 31 miles) above the surface. Ozone (O3) is a molecule composed of three oxygen atoms.
Repeated: also asked in CSS 2011, 2018, 2021.
Key facts: Ozone Layer - In Stratosphere
Ozone layer in: Stratosphere (10-50 km above surface).
Ozone (O3): Three oxygen atoms - absorbs UV radiation.
Protects: Life on Earth from harmful UV-B radiation.
Depletion: CFCs destroy ozone - Montreal Protocol addressed this.
Question 43 of 61 · CSS 2016Not answered
Among the following, the secondary pollutant is:
Explanation
A secondary pollutant is a substance formed in the atmosphere when primary pollutants react with each other or other atmospheric components, rather than being directly emitted from a source. Ozone (O3), Acid rain, Smog and Peroxyacetyl nitrates (PANs) are secondary pollutants.
Key facts: Ozone - Secondary Pollutant
Secondary pollutant: Ozone (O3).
Secondary: Not directly emitted - formed by chemical reactions in atmosphere.
One of the main function of the earth's ozone layer is to:
Explanation
The main function of the Earth's ozone layer is to absorb harmful ultraviolet (UV) radiation from the sun, particularly UVB radiation, protecting life on Earth from its damaging effects. The ozone layer is a region of high ozone concentration located in the stratosphere, roughly 15 to 35 kilometres above the Earth's surface.
Key facts: Ozone Layer - Filters UV Rays
Main function: Filter out ultraviolet (UV-B) rays.
Location: Stratosphere - 15-35 km above Earth.
UV-B effects: Skin cancer, cataracts, crop damage if not filtered.
Not global warming: CO2 causes warming; ozone filters UV.
Depletion: CFCs damage ozone - banned by Montreal Protocol (1987).
Question 45 of 61 · CSS 2016Not answered
The ozone layer protects the earth from _____ sent by the Sun:
Explanation
The ozone layer protects the Earth from harmful ultraviolet (UV) radiation from the Sun.
Repeated: also asked in CSS 2011.
Key facts: Ozone Protects - from Ultraviolet
Protects from: Ultraviolet (UV) rays.
UV-B: Most harmful - causes skin cancer, cataracts.
UV-A: Penetrates ozone - causes tanning, aging.
UV-C: Completely blocked by atmosphere.
Sunscreen: SPF protects skin from UV-A and UV-B.
Question 46 of 61 · CSS 2016Not answered
Which refrigerant is commonly used in cold storage in our country?
Explanation
In cold storage facilities in Pakistan, ammonia (R-717) is a commonly used refrigerant, particularly in large-scale operations, due to its high efficiency and ability to handle heavy cooling loads.
Key facts: Liquid Ammonia - Refrigerant in Pakistan
Refrigerant in Pakistan: Liquid Ammonia (R-717).
Why used: High efficiency, handles heavy cooling loads.
Chemical: NH3 - ammonia.
Modern: HFCs (R-134a) used in smaller systems (cars, homes).
Eco-friendly: Ammonia has zero ozone depletion potential.
Question 47 of 61 · CSS 2015Not answered
Solid and liquid can be separated by the process of:
Explanation
Solid and liquid mixtures can be separated by the process of filtration, where the mixture is passed through a porous material, allowing the liquid to pass through while trapping the solid.
Key facts: Filtration - Separate Solid and Liquid
Separates solid and liquid: Filtration.
Method: Mixture passed through filter paper/porous material.
Residue: Solid trapped on filter - called 'residue'.
Filtrate: Liquid that passes through.
Applications: Water purification, coffee making, blood dialysis.
Question 48 of 61 · CSS 2015Not answered
The composition of the sun is 91%Hydrogen and Helium, and the ratio of heavy metals is:
Explanation
Hydrogen (H) makes up the vast majority of the Sun's mass, around 73%. Helium (He) is the second most abundant element, accounting for roughly 25% of the Sun's mass. Other heavier elements, including oxygen, carbon, neon, and iron, make up less than 2% of the Sun's mass.
Key facts: Sun Composition - 2% Heavy Metals
Heavy metals ratio: About 2% - less than 2% of Sun's mass.
Hydrogen: ~73% of Sun's mass.
Helium: ~25% of Sun's mass.
Others: Oxygen, carbon, neon, iron - less than 2%.
Nuclear fusion: Sun converts hydrogen to helium - generates energy.
Question 49 of 61 · CSS 2015Not answered
Which material conducts heat and electricity?
Explanation
Metals like copper, silver, gold, and aluminium are excellent conductors of both heat and electricity because they have free-moving electrons that facilitate the transfer of energy.
Key facts: Metal - Conducts Heat and Electricity
Conducts both: Metal.
Free electrons: Metals have free electrons - enable heat and electrical conductivity.
Best conductor: Silver (electrical); Diamond (thermal - non-metal exception).
Insulators: Non-metals - rubber, wood, plastic.
Question 50 of 61 · CSS 2015Not answered
The fuel used in rockets:
Explanation
Liquid hydrogen (LH2) is a popular fuel for space rockets, often paired with liquid oxygen (LOX) as an oxidizer, due to its high energy density and efficiency, though it requires specialized cryogenic storage and handling.
Key facts: Rocket Fuel - Liquid Hydrogen
Rocket fuel: Liquid Hydrogen (LH2).
Oxidizer: Liquid Oxygen (LOX) - paired with LH2.
Temperature: LH2 stored at -253°C.
Energy: Highest energy density of any chemical fuel.
Used in: NASA Space Shuttle main engines; Saturn V.
Question 51 of 61 · CSS 2013Not answered
The atmosphere of moon consists of:
Explanation
The Moon has a very thin atmosphere (exosphere) consisting primarily of about 60% nitrogen and 40% inert gases. The document marks (c) as the answer.
Pressure: About 10^-14 of Earth's atmospheric pressure.
Surface: No weather on Moon - no liquid water or wind erosion.
Question 52 of 61 · CSS 2013Not answered
The chemical name of quartz is:
Explanation
The chemical name of quartz is silicon dioxide, with the chemical formula SiO2.
Key facts: Quartz - Silicon Dioxide
Chemical name: Silicon Dioxide (SiO2).
Quartz: Most abundant mineral in Earth's continental crust.
Piezoelectric: Quartz vibrates at precise frequency - used in watches.
Uses: Glass making, electronics, gemstones.
Question 53 of 61 · CSS 2013Not answered
Deuterium differs from Hydrogen in having:
Explanation
Deuterium is an isotope of hydrogen - it has the same atomic number (1 proton) but a different atomic weight because it has one neutron in its nucleus (whereas ordinary hydrogen has none).
Key facts: Deuterium - Isotope of Hydrogen
Differs from H: Same atomic number (1), different atomic weight (2 vs 1).
Deuterium: Has 1 proton + 1 neutron; H has only 1 proton.
Isotopes: Same element, same protons, different neutrons.
Heavy water: D2O - water with deuterium instead of hydrogen.
One of these scientists formulated basic laws of Geometry:
Explanation
Pythagoras of Samos formulated basic laws of geometry, most famously the Pythagorean theorem (a² + b² = c²).
Key facts: Pythagoras - Basic Laws of Geometry
Formulated: Pythagoras - basic laws of geometry.
Famous for: Pythagorean theorem: a² + b² = c².
Era: Ancient Greek - 570-495 BC.
Also: Studied music, astronomy, and philosophy.
Euclid: Father of geometry - systematized it in 'Elements'. (5) (5) (5) (5)
Question 55 of 61 · CSS 2012Not answered
Which of the following reactions happens on Sun?
Explanation
The sun's energy comes from nuclear fusion, where hydrogen nuclei fuse into helium, releasing immense energy in the process - a reaction that occurs in the sun's core under extreme pressure and temperature.
Key facts: Sun's Energy - Nuclear Fusion
Sun's reaction: Nuclear fusion of hydrogen into helium.
Energy released: Mass is converted to energy (E=mc²).
Temperature: Core temperature ~15 million °C.
Fission vs fusion: Fission = splitting; Fusion = combining atoms.
H-bomb: Also uses nuclear fusion - same process as the Sun.
Question 56 of 61 · CSS 2012Not answered
What is the correct sequence of inner planets in our solar system?
Explanation
The inner planets in our solar system, also known as terrestrial planets, are Mercury, Venus, Earth, and Mars, characterized by their rocky, dense, and solid surfaces, and proximity to the sun.
Key facts: Inner Planets - Correct Sequence
Inner planets: Mercury, Venus, Earth, Mars.
Also called: Terrestrial planets - rocky and dense.
Outer planets: Jupiter, Saturn, Uranus, Neptune - gas giants.
Asteroid belt: Separates inner and outer planets.
Mercury: Closest to Sun; Mars: farthest inner planet.
Question 57 of 61 · CSS 2011Not answered
The ozone layer protects the earth from rays sent by the sun:
Explanation
The ozone layer, a region in the stratosphere, protects the Earth from harmful ultraviolet (UV) radiation from the sun, particularly UVB rays.
Repeated: also asked in CSS 2016.
Key facts: Ozone Layer - Blocks UV Rays
Protects from: Ultraviolet (UV) rays.
Location: Stratosphere - 15-35 km above Earth.
Formula: Ozone = O3 (three oxygen atoms).
UVB rays: Cause skin cancer, cataracts - blocked by ozone.
Thermosphere/Ionosphere: 85-600 km - auroras occur here.
Question 59 of 61 · CSS 2011Not answered
The most abundant natural Iron oxides are:
Explanation
The most abundant natural iron oxides are magnetite (Fe3O4), hematite (α- Fe2O3), and goethite (α-FeOOH).
Key facts: Iron Oxides - Hematite and Magnetite
Most abundant: Hematite (Fe2O3) and Magnetite (Fe3O4).
Hematite: Red/brown - primary ore of iron; used in steel production.
Magnetite: Black - naturally magnetic; used in compasses.
Goethite: Third common iron oxide - α-FeOOH (yellow-brown).
Pyrite: FeS2 - 'Fool's gold'; an iron sulphide, not an iron oxide.
Question 60 of 61 · CSS 2011Not answered
The most abundant elements in sea water are:
Explanation
The most abundant elements in sea water are sodium (Na) and chlorine (Cl), which form sodium chloride (NaCl - common salt).
Key facts: Sea Water - Sodium and Chlorine
Most abundant: Sodium (Na) and Chlorine (Cl) - form NaCl (sea salt).
Salinity: Average ocean salinity ~3.5% (35 parts per thousand).
Other elements: Magnesium, Sulphur, Calcium, Potassium.
Most abundant dissolved: Chloride ions (Cl⁻) - 55% of dissolved solids.
Question 61 of 61 · CSS 2011Not answered
the most suitable thermometer for measuring the boiling point of water is:
Explanation
The bimetallic thermometer is most suitable for measuring the boiling point of water as it can withstand high temperatures and provides accurate readings.
Key facts: Bimetallic Thermometer
Best for boiling point: Bimetallic thermometer.
Mercury thermometer: Good but limited by mercury's boiling point (357°C).
Bimetallic: Uses two metals with different expansion rates - robust.
Boiling point of water: 100°C at standard pressure.
Alcohol thermometer: Good for low temperatures - alcohol boils at 78°C.
How often Chemistry comes in the CSS paper
Elements, compounds, acids and bases, metals, gases and everyday chemistry. FPSC asked 61 questions from this area in the 17 CSS General Science and Ability papers from 2011 to 2026, in 16 of those papers. That is 18% of all the MCQs.